Lihlahisoa

Aluminium Alloy Hollow Pipe Extruded Profile Square Aluminium Tube

Paramethara	Lintlha tse qaqileng
Boitsebiso bo ka Sehloohong	Motsoako oa aluminium oa 6063 (o tloaelehileng); Khetho: 6061-T6 (e matla haholo), 5052-H32 (e hanelang mafome bakeng sa tšebeliso ea metsing)
Karolo e Tšeletseng ea Profaele	Phaephe e sekwere: 10×10mm - 200×200mm; Phaephe e kgutlonne: 10×20mm - 150×300mm; Sebopeho se nang le sekoti (se ka ikhethelwa bakeng sa boholo bo bonyenyane)
Botenya ba lebota	0.8mm - 10.0mm; E ka fetoloa bakeng sa litlhoko tse khethehileng tsa mojaro (boholo ba 15mm)
Bolelele ba Nako	Bolelele bo tloaelehileng: 6000mm, 9000mm, 12000mm; Bolelele bo ka fetoloang: 500mm-16000mm; Ho nepahala ha ho seha: ± 0.5mm
Phekolo ea Bokaholimo	Anodization (silevera, e ntšo, khauta), ho koahela phofo ea electrostatic, phetiso ea lijo-thollo tsa lehong, ho koahela ka fluorocarbon
Bokgoni ba ho Jara Mojaro	Motsoako oa 6063: Matla a ho thaepa ≥ 180MPa, Matla a tlhahiso ≥ 110MPa; 6061-T6: Matla a ho thaepa ≥ 310MPa
Sebaka sa Kopo	Litšehetso tsa moaho, litšehetso tsa lebota la likharetene, liraka tsa lipontšo, liforeimi tsa thepa ea ka tlung, lisebelisoa tsa indasteri, merero ea mekhabiso, likarolo tsa likoloi

Liphanele tsa terata tsa Aluminium tsa Premium bakeng sa Matlo a Sejoale-joale

Iteanye le rona

Selelekela sa Sehlahisoa

Phahamisa boleng ba projeke ea hau ka li-tube tsa rona tsa aluminium square - sehlahisoa sa bohlokoa liprofaeleng tsa aluminium bakeng sa lits'ebetso tse fapaneng, 'me re mofani oa hau oa li-tube tsa aluminium ea tšepahalang. Letoto lena la li-tube tsa aluminium tse square/alloy ea aluminium e khutlonnetsepa le etselitsoe makala a kaho, indasteri, mekhabiso le tlhahiso. Ha u sebelisa alloy ea aluminium ea 6063 e le thepa ea mantlha, e kopanya matla a phahameng le sebopeho se setle haholo, e sebetsana ka katleho le mathata a ho robeha ha li-tube tsa tšepe tsa setso. Hore na u hloka li-tube tsa aluminium tse khutlonnetsepa tse ntšitsoeng bakeng sa ho haha li-handrails, li-tube tse sekoti tse sekoti bakeng sa li-racks tsa pontšo, kapa li-tube tse khutlonnetsepa bakeng sa liforeimi tsa lisebelisoa, re fana ka mekhoa ea ho lokisa bokaholimo bo ikhethileng (ho koahela phofo, ho tlotsa oli, khatiso ea phetisetso ea lijo-thollo tsa lehong) le lits'ebeletso tsa ts'ebetso e nepahetseng ho netefatsa hore e loketse litlhoko tsa projeke ea hau. Ke khetho e ntle bakeng sa bareki ba batlang ho tenyetseha ha litšenyehelo, ho tšoarella le ho feto-fetoha ha lintho.

Melemo ea Bohlokoa (Lintlha tsa Bullet)

Motheo oa Lintho tsa Boleng bo Holimo:

E entsoe ka motsoako oa aluminium oa 6063 (6061-T6 e fumanehang bakeng sa lits'ebetso tse nang le mojaro o moholo), e fana ka ts'ebetso e ntle ea ho ntša, ho tjheseletsa le ho hanyetsa mafome. Sebopeho se tšoanang sa thepa se netefatsa matla a tsitsitseng liphaepheng tse hlahisitsoeng ka bongata tse sekwere le tse khutlonnetsepa.

Litlhaloso le Libopeho tse Fapaneng:

E kenyeletsa lipeipi tse sekwere (10×10mm ho isa ho 200×200mm) le lipeipi tsa alloy tsa aluminium tse khutlonnetsepa (10×20mm ho isa ho 150×300mm), tse nang le botenya ba lebota ho tloha ho 0.8mm ho isa ho 10mm. Ho iketsetsa lipeipi tse sekwere tse tiileng kapa tse se nang letho hoa fumaneha ho fihlela litlhoko tsa lits'ebetso tse bobebe tsa mekhabiso le tsa meaho tse boima.

Mekhoa ea ho phekola bokaholimo bo ka fetoloang:

E fana ka mekhoa e meraro ea mantlha ea ho phekola holim'a metsi - ho koahela ka phofo (e hanang ho tsofala, e na le 'mala o mongata), ho tlotsa (ho benya ha tšepe ea tlhaho, e hanang ho bola), le khatiso ea phetisetso ea lithollo tsa lehong (e khahlisang botle, e khabisa haholo). E loketse mefuta e mengata ea lits'ebetso, ho tloha lisebelisoa tsa indasteri ho ea ho mekhabiso ea kahare.

Ho Ntša le ho Sebetsa ka ho Sebetsa ka nepo: E hlomelitsoe ka mela e tsoetseng pele ea tlhahiso ea extrusion, e netefatsang ho nepahala ha boholo ba lipeipi tsa aluminium tse sekwere tse ntšitsoeng ka hare ho ±0.1mm. E fana ka lits'ebeletso tsa ho seha, ho kobeha, ho phunya le ho tjheseletsa, ka ho nepahala ha bolelele ba ho seha ho fihlela ho ±0.5mm.

E theko e tlase, e sebetsang hantle, le e mosa ho tikoloho: Ka nako ea tšebeletso e fetang lilemo tse 15, e bobebe ka 40% ho feta liphaephe tsa tšepe tse nang le litlhaloso tse tšoanang, e fokotsa litšenyehelo tsa lipalangoang le tsa ho kenya. E entsoe ka thepa e ka sebelisoang hape ka 100%, 'me e le mofani oa litsebi oa liphaephe tsa aluminium, e latela maemo a lefats'e a tikoloho.